Guide
How Does Predictive Dialing Work? Pacing, Drops and AMD Explained
A clear explanation of predictive dialing — how the algorithm decides how many calls to place, what abandoned calls are, and how to tune pacing safely.
- Author
- JH Dialer Engineering Team
- Published
- Reading time
- 2 min read
On this page
Why dial more numbers than you have agents?
On a typical outbound list, most calls are not answered by a person — they ring out, hit voicemail, are busy or disconnected. If a dialer placed one call per free agent, the agent would spend most of the hour listening to rings. Predictive dialing places several calls per agent so that enough of them connect to keep everyone busy.
What does the algorithm measure?
Every few seconds the dialer looks at:
- Answer rate — what share of recent calls reached a live person.
- Average talk and wrap-up time — how long agents stay busy per call.
- Agent states — who is waiting, talking, in wrap-up or paused.
- Recent drop rate — how many answered calls had no agent available.
From these it predicts how many agents will be free in the next few seconds and sets a dial level — the number of lines to dial per waiting agent.
What is an abandoned (dropped) call?
If more people answer than there are free agents, the extra calls cannot be connected. These are abandoned or dropped calls. The recipient hears silence or a short recorded message — a poor experience, and regulated in many markets.
The drop rate is usually calculated as abandoned calls divided by live answered calls over a period. A predictive configuration should always have:
- A maximum drop percentage that the algorithm respects.
- A maximum dial level to stop runaway over-dialing.
- Reporting so you can prove what the rate actually was.
How does VICIdial implement it?
VICIdial offers several adaptive methods:
| Method | Behaviour |
|---|---|
ADAPT_HARD_LIMIT |
Dials predictively but stops increasing pacing once the drop target is reached. |
ADAPT_TAPERED |
Allows more aggressive dialing early in the shift and tightens toward the target over time. |
ADAPT_AVERAGE |
Aims to average the drop target across the measurement period. |
Each campaign also has an adaptive drop percentage, a maximum adaptive dial level and an intensity modifier. Getting these right for your list quality is where most tuning effort goes.
Where does answering machine detection fit?
AMD listens to the first seconds after answer and guesses whether it is a person or a machine. It can save agent time on lists with many voicemails, but:
- It adds a short delay before a live person is connected, which some people hang up on.
- It misclassifies some people as machines (lost conversations) and some machines as people.
Test AMD on a portion of a list and compare contact rates before enabling it everywhere.
When should you not use predictive dialing?
- Teams under roughly ten agents per campaign.
- High-value or complex calls where agents should read the record first.
- Campaigns where any abandoned call is unacceptable.
For those, progressive or power dialing is usually a better choice.
Frequently asked questions
What is a good abandoned call rate?
Many regulators use 3% as a maximum, measured over a defined period, though rules vary by country. Many centers target lower than their legal maximum to leave a safety margin.
Why does predictive dialing need many agents?
The prediction is statistical. With few agents, random variation in answers and call lengths is large relative to the team, so the dialer either over-dials (causing drops) or under-dials (causing idle time).